Forgot Password
 Register now
Search
View: 70236|Reply: 47

Flashing TOT/BIN/DZ Firmware guides

[Copy Link]

1114

Threads

1257

Posts

49Wan

Credits

Administrator

Rank: 9Rank: 9Rank: 9

Credits
497050
Posted at 2014-9-19 03:37:15 | All floors |Read mode
Make sure you have 1. TOT/BIN/ or DZ firmware. 2. DLL files. 3, LG drivers

step 1:
LG driver installation
http://tool.xcdn.gdms.lge.com/dn/downloader.dev?fileKey=STsWrO77750746152704102/LGUnitedMobileDriver_S51MAN312AP22_ML_WHQL_Ver_3.12.3.exe

step 2:
Download and install Setup_LGFlashTool_1.8.1.1023.exe
When installing, do not change the installation path
“C:\LG\LGFlashTool”After installation is complete, remove the "Run_LGFlashTool_1.8.1.1023" check

www.lgbbs.com.cn/TOOL/Setup_LGFlashTool_1.8.1.1023.exe
Or
www.lgbbs.com.cn/TOOL/Setup_LGFlashTool_1.8.9.0.exe
Or
Setup_LGFlashTool_2.0.1.6.zip(LG G5)
https://mega.nz/#!iV0yRaAC!pnGc5JwrxABbUYM-j2CYW5c7voMPXqis4X1Qqf51tvg

step 3:
Download MegaLock.dll file, MegaLock.dll cover to “C:\LG\LGFlashTool”
www.lgbbs.com.cn/TOOL/MegaLock.dll

step 4:Your phone into "download mode"
Not enter, you can see:
http://www.lgbbs.com.cn/thread-5-1-1.html
After entering, check the device manager there is no LG COM port
If you already display COM port, the LG COM port number is changed to COM41





step 5:
Open the "LGFlashTool" on the computer desktop
Please add the DLL file and TOT/BIN/DZ file, after click "OK”



step 6:
Click the Port Settings
See Figure Choose a port number



step 7:
Click Start (right arrow)

Waiting for the CRC check, the process for 1-3 minutes


step 8:
Ready


step 9:
When ready, remove the USB, reconnect the computer after three seconds, it will automatically begin Flash


step 10:
Flash process takes about 5-8 minutes, Flash is complete, the phone will automatically boot, boot, unplug the USB and turn off Flash ToolsComplete


Reply

Use props Report

0

Threads

1

Posts

0

Credits

Newbie Member

Rank: 1

Credits
0
Posted at 2016-3-11 02:10:25 | All floors
thank you
Learn to write.
Reply Support 1 Opposition 1

Use props Report

1114

Threads

1257

Posts

49Wan

Credits

Administrator

Rank: 9Rank: 9Rank: 9

Credits
497050
 Author| Posted at 2014-11-11 21:16:05 | All floors
pimix2009 Posted at 2014-11-11 19:29
Phone is stock on Factory Reset status 2

Flashing once again
Reply Support 2 Opposition 0

Use props Report

0

Threads

3

Posts

0

Credits

Newbie Member

Rank: 1

Credits
0
Posted at 2014-10-16 15:57:13 | All floors
nice info for flash via flash tool
Reply Support 2 Opposition 0

Use props Report

0

Threads

3

Posts

200

Credits

Newbie Member

Rank: 1

Credits
200
Posted at 2014-10-31 01:38:37 | All floors
I am unable to get the password to exxtract the firmware. Where is it?

Also, where is the dll file to ad into flash tool?
Reply Support 1 Opposition 1

Use props Report

0

Threads

1

Posts

0

Credits

Newbie Member

Rank: 1

Credits
0
Posted at 2016-11-28 00:47:33 | All floors
Hi Admin!
I hope you read this message...

I have problem with flashing stock .tot onto LG G3 D855.. (Windows 10 x64)

This error: [ERROR] : Partition Change factory Partition (Phone!=tot) (Stop at 6%)
I try use Euro, Hongkong, and Taiwan .tot but none worked



My phone is stuck in download mode and cannot start...
What can I do to fix problem?
Reply Support 1 Opposition 0

Use props Report

0

Threads

1

Posts

0

Credits

Newbie Member

Rank: 1

Credits
0
Posted at 2016-11-10 12:32:36 | All floors
Buena noche, ¿Podría resubir los archivos?, se lo agradecería mucho...
Reply Support 1 Opposition 0

Use props Report

1114

Threads

1257

Posts

49Wan

Credits

Administrator

Rank: 9Rank: 9Rank: 9

Credits
497050
 Author| Posted at 2016-11-7 09:53:07 | All floors
jafarcik Posted at 2016-11-7 00:03
WHat if it goes to 90% and after fboot chekck it shows fboot fail,should i flash again ?

Yes
Reply Support 1 Opposition 0

Use props Report

0

Threads

3

Posts

0

Credits

Newbie Member

Rank: 1

Credits
0
Posted at 2016-11-7 00:03:56 | All floors
WHat if it goes to 90% and after fboot chekck it shows fboot fail,should i flash again ?
Reply Support 1 Opposition 0

Use props Report

1114

Threads

1257

Posts

49Wan

Credits

Administrator

Rank: 9Rank: 9Rank: 9

Credits
497050
 Author| Posted at 2016-11-3 09:25:40 | All floors
dipen Posted at 2016-11-1 20:57
I have no DLL file and I can't buy it because I am in China.

Please tell me the files you need
Reply Support 1 Opposition 0

Use props Report

0

Threads

1

Posts

0

Credits

Newbie Member

Rank: 1

Credits
0
Posted at 2016-11-1 20:57:22 | All floors
I have no DLL file and I can't buy it because I am in China.
Reply Support 1 Opposition 0

Use props Report

0

Threads

1

Posts

0

Credits

Newbie Member

Rank: 1

Credits
0
Posted at 2014-10-27 09:24:15 | All floors
Hi, i try to use LGFlashTool but, it ask for a login, i dont know what to do. help me please
Reply Support 1 Opposition 0

Use props Report

0

Threads

2

Posts

0

Credits

Newbie Member

Rank: 1

Credits
0
Posted at 2014-10-27 16:38:15 | All floors
THANK YOU FOR SHARE
Reply Support 1 Opposition 0

Use props Report

1114

Threads

1257

Posts

49Wan

Credits

Administrator

Rank: 9Rank: 9Rank: 9

Credits
497050
 Author| Posted at 2014-10-31 10:39:30 | All floors
theo82 Posted at 2014-10-31 01:38
I am unable to get the password to exxtract the firmware. Where is it?

Also, where is the dll file  ...

There are only guidelines. Firmware and DLL files need to be in site search
Reply Support 1 Opposition 0

Use props Report

0

Threads

3

Posts

200

Credits

Newbie Member

Rank: 1

Credits
200
Posted at 2014-11-1 04:58:24 | All floors
Thanks, I got them.

when I install the drivers and go into the device manager, I cant see the LGE AndroidNet USB Serial Port (COM17) so as to change to (COM 41). I only get the LGE mobile USB Serial Port (COM6) and LGE mobile USB Diagnostics Port (COM8). Therefore when in download mode, the PC doesnt communicate with the phone. Please assist me to ensure I I get the (COM 17).
Reply Support 1 Opposition 0

Use props Report

1114

Threads

1257

Posts

49Wan

Credits

Administrator

Rank: 9Rank: 9Rank: 9

Credits
497050
 Author| Posted at 2014-11-1 10:47:11 | All floors
theo82 Posted at 2014-11-1 04:58
Thanks, I got them.

when I install the drivers and go into the device manager, I cant see the LGE  ...

You can put LGE mobile USB Serial Port (COM6) changed LGE mobile USB Serial Port (COM41)
Reply Support 1 Opposition 0

Use props Report

0

Threads

3

Posts

200

Credits

Newbie Member

Rank: 1

Credits
200
Posted at 2014-11-2 00:55:16 | All floors
Thanks a ton. It worked like a charm.
Reply Support 1 Opposition 0

Use props Report

0

Threads

1

Posts

0

Credits

Newbie Member

Rank: 1

Credits
0
Posted at 2014-11-11 19:29:35 | All floors
Phone is stock on Factory Reset status 2
Reply Support 1 Opposition 0

Use props Report

You need to log in before you can reply Login | Register now

This forum Credits Rules

Archiver|Mobile ver.|Darkroom|LG Android Mobile Forum

GMT+8, 2017-1-21 23:22 , Processed in 0.158424 second(s), 23 queries .

Powered by Discuz! X3

© 2001-2013 Comsenz Inc.